SPECIFICATIONS

AC Current: 200mA / 10A

AC Voltage: 1000V

Auto Power Off: Yes, after approx. 30 minutes of inactivity

Battery Included: no

Brand Name: L.AOL.AU

Choice: yes

DC Current: 2mA~20A

DC Voltage: 200mV / 2V / 20V / 200V / 1000V

DIY Supplies: Electrical

Data Record: No

Display Type: Digital Display

High-concerned chemical: none

Is Smart Device: no

Measuring Capacitance Range: 2nF~2000μF

Measuring Resistance Range: 200Ω-200MΩ

Model Number: DT-9205A

Operating Mode: Manual Range

Power Supply: 9V 6F22 battery (not included)

Safety Rating: CAT II 1000V

Semi-finishedproduct: No

LAOLAU DT-9205A Digital Multimeter - 3 1/2 Digit LCD Display, AC/DC Voltage Current Resistance Capacitance Transistor Tester with Continuity Buzzer, Overload Protection, Auto Power Off

Clear Pain Points + Solutions

Pain Point 1:I don't know what range to select and I'm afraid of damaging the meter.

Our Solution: Full-range overload protection on all functions. The meter is equipped with overload protection across every measuring range, with fuse protection on mA ranges (0.2A/250V fuse) and maximum input protection up to 1000V DC / 750V AC. Even if you accidentally select the wrong range, the meter is designed to protect its internal circuitry from damage. If you're unsure of the measured value, simply start with the highest range and work your way down.
Pain Point 2:I can't read the screen clearly, and the numbers are too small

Our Solution: Large 25mm high-digit LCD display with 1999 maximum reading. The oversized digits make readings clearly visible even from a distance or in poor lighting conditions. The display also features clear over-range indication ("1") and low battery warning symbol at the bottom left corner, so you'll never be left guessing.
Pain Point 3:I keep forgetting to turn it off and the battery dies quickly

Our Solution: Built-in auto power-off function. The instrument automatically cuts power after approximately 30–60 minutes of inactivity, putting the meter into sleep mode to conserve battery life. When you're ready to use it again, simply rotate the function switch to turn it back on—no wasted batteries, no frustration.

Other Product Features

32 measuring ranges 

– covers virtually all common electrical testing needs in one compact deviceResistance Measurement

- Quickly Detect Open Circuits & Short CircuitsContinuity Test

- Instant Beep for Fast Circuit DetectionProduct Functions

DC Voltage Measurement – Accurately measures DC voltage for batteries, power supplies, automotive electronics, and DC circuits.

AC Voltage Measurement – Tests household outlets, electrical wiring, and various AC power systems.

DC Current Measurement – Measures DC current for electronic devices, automotive diagnostics, and circuit testing.

AC Current Measurement – Monitors AC current in appliances, motors, and electrical equipment.

Resistance Measurement – Checks resistance to troubleshoot circuits, components, and wiring.

Capacitance Measurement – Measures capacitor values for maintenance and electronic repairs.

Diode & Continuity Test – Tests diodes and quickly identifies open or closed circuits with an audible buzzer.

Transistor hFE Test – Measures transistor gain (hFE) for NPN and PNP transistor testing.

Live Wire Detection – Quickly identifies live wires with visual and audible alerts for safer electrical work.Application Scenarios

• Battery Testing – Measure DC voltage of batteries and portable power sources.

• Household Electrical Testing – Check AC outlets, extension cords, and home wiring.

• PCB & Electronic Circuit Repair – Measure resistance, capacitance, and circuit parameters for troubleshooting.

• Capacitor Testing – Test capacitor values in electronic devices and circuit boards.

• Diode & LED Testing – Verify the condition of diodes and LED strips.

• Continuity Checking – Quickly detect open or closed circuits with an audible buzzer.

Package Contents:

1 × DT9205A Digital Multimeter

1 × Pair of Test Leads (Red + Black)

1 × User Manual

IMPORTANT NOTE

-1 × 9V battery required (not included).

-Install the battery with the correct polarity before use.